ATTEN ST-862D Lead-free Hot Air Gun Soldering Station Intelligent Digital Display 1000W ST862D Rework Station For PCB Chip Soldering Repair

Easy Temperature Setting Temperature Lock Function ℃/℉ available

• Press air "up" or "down" key to adjust the air volume and temperature. Long press for quickly adjusting. Stop pressing the key for 3 seconds, it will save the setting automatically.
• The cool air function is used when the temperature setting value under 100 ℃.
• Saving and Call Shortcut Temperature

Press button "1"/ "2"/ "3" to call or save preset temperature and air flow value.

Under Menu Loc, it can turn on or off temperature lock function by pressing "up" or "down" key; then press Button "2" to exit and save your setting. In menu C-F mode, it can switch temperature unit ℃/℉ by pressing "up" or "down"(Note: if both timing function and standby function are on simultaneously, timing function will be recount time when the hot air gun working. )

Temperature Calibration Beeping function Timing function Standby Function

• Under menu CAL mode, press "up"or"down" key to enable temperature calibration function, which calibration range is -50℃~ 50℃(-90℉~90℉). Calibration value will be negative as actual-measured temperature is lower than setting temperature; Calibration value will be positive as actual-measured temperature is higher than setting temperature.
• Under menu BL mode, it can turn on/ off the beeping function by pressing "up" or "down"key.
• Under menu HTO mode, it can adjust time of timing function by pressing "up" or "down" key. Time range from 10 to 900 seconds.
• In menu STBY, press "up" or "down" can adjust standby function on or off. It can adjust the standby time from 1 to 10mins. When standby function is on, this handle can be shut off automatically when putting it on this holder. If within standby time, taking this handle out of holder it will recover to work; if beyond the standby time, it won't work until pressing the button on hot air gun.

Comfortable grip, Lightweight and Convenient

• In the machine power on state, you need to press the switch on the handle of the air gun,long press for 3 seconds to switch the cold air or hot air.
• When STBY function is off,Need to press handle button to turn the work,on or off when picking up the hot air gun,the air gun is automatically turned off, when push it on the holder under working status .
• When STBY function is on (the time between1~10 minutes),the air gun is automatically turned on, when picking up handle durning stand-by time,Need to press handle button again to turn on,when picking up the hot air gun after stand-by time,the air gun is automatically turned off, when push it on the holder under working status .

Menu settings

• Long press button 1 and 3 to enter the Menu
• Press button 1 and 3 to change Memu items
• Press button 2 to exit and save value
• LOC is locking temperature and air flow
• Temperature unit can echanged ℃/℉ FAC is restoring factory setting CAL is temperature compensation(±50℃) HTO is timing work(10S-900S)